A flail mower is ideal for maintaining rough grassed areas, pasture land, and woodland walks where a conventional mower gets clogged up and struggles to cut.
SCH Supplies Ltd’s FM42 and FM48 have the same base design and construction, with the main difference being that the FM42 has a 42” cutting width and a 9HP Honda engine.
The FM48 has a 48” cutting width and a 13HP Honda engine. SCH manufacturers both machines to equally high standards and levels of durability.
The flail mower is a powerful, towed, long grass cutter with 36 (FM42) and 42 (FM48) ) Y-shaped cutting flails which are driven by two ‘V’ belts. These sharpened flails are easily replaceable to extend the lifetime of the machine.
Mounted at the rear of the cutter is a one-piece roller. This roller is easily adjusted to fine-tune the cutting height and alleviates scalping by ensuring the flails lift above the highest peaks on uneven ground.
The transport wheels situate at the rear of the machine instead of the side. The mower cuts closer to the edge and can squeeze through narrow pathways by mounting the transport wheels in the new position.
SCH manufacturers over 250 quality British built machines that can be towed behind a tractor, ride on mower or ATV.
