ECOPROTEC has launched its new Porcelain Tile Enhancer – a water-based treatment for exterior and interior porcelain tiles and pavers.
As well as giving tiles a ‘just washed look’, the new self-shine enhancer also provides practical benefits, being highly resistant to foot traffic, general wear and stains, and also promoting easier maintenance.
The new eco-friendly treatment also provides UV-resistance and, whilst glossy in nature, causes minimal change to a tile’s slip resistance properties.
On clean, dry and residue-free surfaces, ECOPROTEC Porcelain Tile Enhancer is applied with a foam roller, sealant applicator pad or paint brush until an even, thin film is created.The treatment should be left to dry for one hour. For a more enhanced appearance, further coats can be applied at rights angles – and with an hour’s drying time between each application - to a maximum of four coats.The treatment can also be used on existing tiles and pavers which should first be cleaned with ECOPROTEC Intensive Cleaner and then rinsed and left to dry for 24 hours before application.
Being water-based, the enhancer can be applied over residual moisture and is safe to use in unventilated spaces.It is also breathable, so will not trap moisture within the tile or substrate.To maintain the glossy aesthetic, tiles and pavers can be renovated by stripping the original coating using ECOPROTEC Joint Residue Remover and reapplying every 2-3 years.Surfaces should be routinely swept and regularly mopped using ECOPROTEC General Cleaner.
ECOPROTEC Porcelain Tile Enhancer is available in one litre and five litre units and has an approximate coverage of 30-40 m2 per litre, per coat, depending on the tile texture.
