SISIS will
be exhibiting at FSB Cologne, Germany from 5-8 November 2019 where the British
manufacturer will be showcasing a range of market leading turf maintenance
equipment for synthetic surfaces.
Visitors
to the exhibition will able to locate SISIS in hall 10.2, Aisle A, Stand No.
038, and will have the opportunity to see the following products:
SISIS Brush-Pro - The SISIS Brush-Pro is a
ride-on brushing system comprising a pair of mid mounted oscillating units and
three rear mounted brush units that that have been specifically designed for
maintaining synthetic surfaces. The machine has been designed for maximum
manoeuvrability and operator comfort which features an electric start,
hydrostatic drive for forward/reverse and its brush combinations – oscillating
for thorough periodic work and rear mounted brushes for more routine work.
SISIS Osca 3 - The SISIS Osca 3 is a tractor
mounted powered oscillating brush with a 1.9 meter working width and is equally
effective when used on synthetic turf with sand or rubber infill. The two
oscillating brushes stand the carpet fibres up and redistributes the infill
evenly, minimising compaction on the surface and improving its performance –
giving consistent playing characteristics while preventing pile damage caused
by reduced infill levels.
A
contributory factor to the reduction of compaction is that the Osca’s working
width will use fewer passes than other more conventional drag brushes to
complete a pitch. Its aggressive brushing action agitates the upper infill
level of the surface from side to side as well as brushing forward, helping
reduce surface compaction and encourage the fibres to stand up straight which
reduces the risk of contamination, drainage problems and leaves a consistent
playing surface across the whole pitch.
SISIS Twinplay with Flexicomb and straight brush - The
SISIS team will also be showcasing the Twinplay Towed Implement Frame (TIF) and
the Flexicomb and straight brush. The Twinplay frame is a single pass
maintenance system which accepts two implements at any one time and the
Flexicomb and straight finishing brush is recommended for both sand and rubber
infill surfaces. The Flexicomb ensures even distribution of infill and lifts
the carpet pile while the straight brush produces a smooth level and
eye-catching presentation. For rubber crumb surfaces a more aggressive brushing
is required and this can be achieved by adjusting the crossbar on the Flexicomb
to stiffen the bristles.
As well as
the products being on show, the experienced SISIS team will be on hand to
advise on maintenance procedures and offer tips on how to prolong the life of
synthetic playing surfaces.
